Dust collector for laser cutting
Dust collector for laser cutting
EHI-2@3KW@2000CHM
EHI-3@4KW@3000CHM
EHI-4@5.5KW@4000CHM
EHI-6@7.5KW@5500CHM
EHI-4N@5.5KW@4000CHM
EHI-6N@7.5KW@5500CHM
New type:EHI-4N and EHI-6N
Prev : Lead Acid Battery
1、 Especially designed for high concentration and fine dust collector. 2、Can be installed inside, the size can be customize. 3、 Exhaust gas emission less than 1mg/m3 with HEPA filter. 4、The usage of filter material is 25% higher than the horizontal installation. .If the dust contains VOCS smell, it can be added the third stage carbon active filter. 5、Humanized design：with Wifi model: remote control display, LAN or Internet control, phone APP control, you can track monitor the dust collector at any time.
1、 All-in-one design, easy for installation and operation, save 30% shipping cost. 2、Adaptable for dry dirty dust, and the dirty gas temperature should less than 120℃. 3、Lower price in filter replacement. 4、The usage of filter material is 25% higher than the horizontal installation. 5、If the dust contains VOCS smell, it can be added the third stage carbon active filter. 6、Humanized design：with Wifi model: remote control display, LAN or Internet control, phone APP control, you can track monitor the dust collector at any time. 7、Blue/Black/Grey/Green and more colors can be chosen.
1、Occupy 50% area of baghouse dust collector, save factory space. 2、The air volume can be adjusted flexibility with modular design, only need to add or deduct unit model. 3、Abrasion-resistant inlets, exhaust dampers can be added for special dirty dust . 4、Stainless steel material can be chosen, explosion Relief Vents Can be installed. 5、Humanized design：with Wifi model: remote control display, LAN or Internet control, phone APP control, you can track monitor the dust collector at any time. 6、Dust collector body warranty : 10 years
Erhuan Road, Wuwei indusrial zone, Xushe Town, Yixing, Jiangsu China© 1994-2020 erhuancn.com. All rights reservedSite map