1.1.Product name: Non powered polishing workbench, the air volume range is determined by the size of the workbench and the actual air volume required by the position.

1.2. Polishing workbench without power fan installed, usually consisting of multiple workbenches arranged in one production line, sharing one large dust collector.

1.3.Due to the lack of a fan and pulse valve installed on the polishing table, it is relatively quiet during operation and does not generate any additional noise.

1.4.The size of the polishing table is determined based on the size of the workpiece, and the amount of thick load-bearing plate needed to support the workpiece is determined by the weight of the workpiece.

1.5.The countertop of the polishing workbench can be made of corrosion-resistant plastic, such as the workbench used for polishing lead-acid battery plates, or it can be made of carbon steel or stainless steel material.

1.6. The height of the polishing table is usually customized according to the worker's operating habits, whether to operate while sitting or standing, and the height, based on these parameters to create a suitable workbench.

1.7. Select different central dust collectors based on the characteristics of the polished dust. If it is flammable and explosive dust, the selected dust collector should have explosion-proof function.

1.8. Each workbench can be equipped with under table and side table exhaust. If it is welding smoke, it will be selected to exhaust from the top. Each exhaust port is equipped with an air volume control valve to adjust the air volume.